Racing-inspired and Studio-designed, Scotty Cameron’s 2018 Global Limited Select Fastback steers this time-honored design in a new direction with an updated mini-slant neck, dark Tour Black finish and shaft, as well as a graphics package reminiscent of a track-ready grand prix sports car.
Designed with its focus on performance, this 34-inch mid-mallet embodies Scotty’s Fastback aesthetics of sculpted, industrial elegance while optimizing every component for maximum output.
The Global Limited integrates Scotty’s proven multi-material technology of mixing aircraft grade aluminum with heavier stainless steel for enhanced MOI, stability and forgiveness, while also incorporating the Select line’s four-way sole balancing, increased vibration dampening material and the Tour-preferred single milled sight line.
スペック
Loft: 3.5º
Lie: 70º
Length: 34″
Head Material: 303 stainless with 6061 aircraft aluminum face and sole inlays
Offset: One Full Shaft
Grip: Black Pistolero
Face: Mid-mill
Neck: Mini-slant
定価:$1,400.00 (¥148,400)
Scotty Cameron 2018 Global Limited Select Fastback Putter
TaylorMade M3 TOUR Driver Head Only・・・$1,250.00 (¥133,750)
TaylorMade M4 TOUR Driver Head Only・・・$1,400.00 (¥149,800)
TaylorMade M4 TOUR Driver Head Only
TaylorMade M3 TOUR Driver Head Only
TaylorMade GAPR LO・・・$249.99 (¥26,749)
TaylorMade GAPR MID・・・$249.99 (¥26,749)
TaylorMade GAPR HI・・・$249.99 (¥26,749)
ツアープロではサークルTモデルが・・・!
市販モデルはコチラ>>
• Models: CX-01, CX-02
• Branding: Scotty Cameron Concept X
• Design: Wingback blade with Nuckle Neck (CX-01) and Joint Neck (CX-02) options
• Face Type: Mid-Mill
• Head Material: 303 stainless steel with 6061 aircraft aluminum face and sole inlays
• Sole Weights: Raw stainless steel: 33” – 2 x 20g; 34” – 2 x 15g; 35” – 2 x 10g
• Cosmetics: Stainless steel with premium stealth gray PVD finish. Bright dipped black anodized aircraft aluminum face and sole inlays. Raw weights and engravings. Jet black paintfill
over anodized finish.
• Grip: Custom Gray Pistolero with gloss black paintfill
• Neck/Shaft: Plumbers neck-style Nuckle Neck (CX-01) and low slant Joint Neck (CX-02) with milled stainless steel elbow joint
• Shaft Ring: Milled Aircraft Aluminum
• Headcover: Scotty Cameron Concept X – small square
• Custom Options: None
スペック
• Loft: 3.5°
• Lie: 70°
• Length: 33”, 34”, 35”
• Offset: Full Shaft
定価:$725.00 (¥78,300)
Scotty Cameron Limited Concept X Putters
定価:$979.00 (¥103,774)
Scotty Cameron Newport 2 Black/Red/White Custom Putter
定価:$747.00 (¥79,182)
Scotty Cameron Newport 2 Black Custom Putter
定価:$979.00 (¥103,774)
Scotty Cameron Futura 6M Gold Custom Putter
定価:$820.00 (¥86,920)
Scotty Cameron Newport 2 Custom #8
定価:$820.00 (¥86,920)
Scotty Cameron Newport 3 Custom #7
その他のScotty Cameron カスタムパターはコチラ>>
2018年モデルキャロウェイROGUEドライバーをお好みのカラーで特注オーダーが可能!!
人気商品のためお早めのご要望をお待ちしております!
$599.99 (¥61,799) ~から
Callaway Rogue Custom Driver with Paint Fill (カスタムドライバー)
$195.00 ~ (¥20,085)
Titleist Vokey Design SM7 Raw Custom Wedge (カスタムウェッジ)
日本未発売です。
同じ太さの二本の棒を用意して(約30センチ)。2本の棒の左片方をくっつけて片方を少し離して(1センチ)平坦なテーブルの上におきます。其の上にゴルフボールを置きます。1センチの幅を少しづつ開くと、ボールは棒の間隔幅の広いほう右側へ動きます。ボールの重力が其の重さで逃げが起きる現象ですね。
フェースの広い範囲で打っても1点にボールが集まるので、かなり有利な条件でパターをする事になります。
何が凄いのかというと、科学的でここまで一生懸命にパターを考えている人が居るんだな~と、感激しました。
下の図を見てください。パターロボットで各緒条件を固定しEVNROLLのフェースの在る無しでテストした結果なのです。つまり、パターフェースの違いだけで下記の図ように異なるのです。
左が、普通のパター、右がEVNROLLです。打つ場所が異なってもボールは真っ直ぐ行く事を証明しました。
Ultra-High 10,000 MOI mallet. Patented.
• CNC Milled in Carlsbad, California USA
• Head Material – 6061 Aluminum
• Hosel Material – 303 Stainless Steel
• Cylinder Weights – 303 Stainless Steel
• Shaft – FST Stepless, .370” Tip
• Grip – Stock Grip – Custom EVNROLL non-taper 1.2
• Swing Weight Balanced By Length – 33” @ E4 , 34” @ F0 , 35” @ F4
• Hosels – Plumber Neck or Short Slant Neck
定価:$359.00 (¥37,695)
Evnroll 2018 ER9-10K EXTREME Putter